Φ20—Φ32 sucker rod epoxy spraying production line

Φ20—Φ32 sucker rod epoxy spraying production line

Work piece: Φ 20- Φ 32 × 10m Coating requirements: epoxy powder coating 400-500um Process line speed: 3-4m/ min

Features

Transmission line length of 40 m containing eight 4.0 m × 0.8 yards gear frame; bracket base and the drive wheel 10 in all channel # welding. There are also 4 single racks (one of which is equipped with high temperature resistant tires) for easy chasing and pipe removal.

 

Detailde


Process requirements of epoxy spraying production line

Work piece: Φ 20- Φ 32 × 10m
Coating requirements: epoxy powder coating 400-500um
Process line speed: 3-4m/ min

Coating line


Transmission line length of 40 m, containing eight 4.0 m × 0.8 yards gear frame; bracket base and the drive wheel 10 in all channel # welding. There are also 4 single racks (one of which is equipped with high temperature resistant tires) for easy chasing and pipe removal.
There are 4 transmission powers , all of which adopt frequency conversion speed regulation. The frequency converter adopts Hailipu frequency converter of Danfoss Technology of Denmark. The frequency conversion speed regulation makes the steel pipe transmission smooth, so that the thickness of the anti-corrosion layer is uniform. We also use a pressure tube mechanism that prevents the pipe from affecting the pipe being machined during acceleration and decoupling.
The drive wheel uses pneumatic tires (due to the small light weight of the work-piece, the deformation ability of the pneumatic tire is strong), and the drive shaft is connected. The reducer uses a pendulum type reducer. The coating line has a total length of 40meters.
 Medium frequency induction heating equipment: KGPS-250/1
 
Electrostatic spraying equipment
:

 4 gun control center DK type:The above device includes 4 automatic spray guns , the spray gun is built-in high pressure, the control cabinet controls the voltage, current and gas path system of 4 automatic spray guns, and controls the powder supply system of the Venturi powder supply pump.

The above device contains one set of fluidized bed powder supply system . The size of the fluidized bed : (L × W × H) 800 × 775 × 570 (mm) contains 4 venturi powder supply pumps.
 Pipe system:
Upper and lower fork tube 4, a cylinder 4 and a control system. (including solenoid valves, valve blocks, PVC gas pipes, control buttons, etc.).

intersting Products:*
Name:*
Company:
Email:*
Tel/Mobile:
Tell us your needs (as specific as possible)